Servo 150 for Bridgeport (hand feed mill)
Only $825.00
On SALE for only $743.75

Rebuild Kit for a 2 HP Bridgeport
Only $326.00
On SALE for only $295.00

Acu-Rite VUE Milling 2-Axis Digital Readout System, 13"x32"
Only $1,486.00
On SALE for only $1,188.80

Trusty-Cook Soft Face Dead Blow Model #3
Only $37.00
On SALE for only $29.60

Guide to Renovating the "2J" Head Machine
Only $29.95
On SALE for only $25.95

Machinist Calc Pro
Only $79.95
On SALE for only $69.95

Maxi Torque-Rite Power Drawbar for Bridgeport 2J Head (R-8)
Only $575.00
On SALE for only $546.25

Shopping CartOrder Tracking
Repair & Rebuilding

We offer several options for your head rebuild. Once we have received your head we will disassemble and evaluate the head. We will then contact you and discuss our findings with you. The normal rebuild cost normally runs between $1,250.00 and $1,800.00 (could be more depending on the extent of the damage). The rebuild should take two to three days to complete. Please give us a call at 800-285-5271 with any questions you might have.

Basic Bridgeport Variable Speed Head Rebuild

1. Set-up and test run the head for proper operation in all speed and feed before disassemble.
2. Disassemble and clean each component of the upper head, inspection for damage or excessive wear and informing you of problems we find that will be over and above the basic rebuild.
3. Install new upper head bearings, bushings, belts and keys into the upper half of the head (these parts are included in the cost of the rebuild).
4. Make required adjustments to the quill down feed to insure proper operation.
5. Reassemble the head and test for proper operation.
6. Time required to complete the above-proposed repairs will be one to three days.
7. Included Parts: 7 Top Half Head Bearings, 4 Bushings, 2 Keys, 1 Drive Belt, 1 Timing Belt
8. Any additional required or requested parts will be at an additional charge and will not be installed without the prior approval of your company.
9. Parts & Labor to complete the Basic VS Top Half Head Rebuild: $895.00
10. If you would like new Spindle Bearings installed add $500.00.


Standard Bridgeport Variable Speed Head Rebuild

1. Set-up and test run the head for proper operation in all speed and feed before disassemble.
2. Disassemble and clean each component of the upper head, inspection for damage or excessive wear and informing you of problems we find that will be over and above the standard rebuild.
3. Install new upper head bearings, bushings, belts and keys into the upper half of the head (these parts are included in the cost of the rebuild).
4. Install new bearings into the motor of the head.
5. Install new brake shoes & springs into the head.
6. Make required adjustments to the quill down feed to insure proper operation.
7. Reassemble the head and test for proper operation.
8. Time required to complete the above-proposed repairs will be one to three days.
9. Included Parts: 7 Top Half Head Bearings, 2 Motor Bearings, 4 Bushings, 2 Keys, 1 Drive Belt, 1 Timing Belt, 2 Brake Springs, 1 Set Brake Shoes
10. Any additional required or requested parts will be at an additional charge and will not be installed without the prior approval of your company.
11. Parts & Labor to complete the Standard VS Top Half Head Rebuild: $1,395.00
12. If you would like new Spindle Bearings installed add $500.00.

Deluxe Bridgeport Variable Speed Head Rebuild

1. Set-up and test run the head for proper operation in all speed and feed before disassemble.
2. Disassemble and clean each component of the upper head, inspection for damage or excessive wear and informing you of problems we find that will be over and above the deluxe rebuild.
3. Install new upper head bearings, bushings, belts and keys into the upper half of the head (these parts are included in the cost of the rebuild).
4. Install new castle gears (splined gear hub, spindle pulley hub).
5. Install new bearings into the motor of the head.
6. Install new brake shoes & springs into the head
7. Install new feed reverse knob, feed trip lever and reverse trip ball lever in the lower half of the head.
8. Make required adjustments to quill down feed to insure proper operation.
9. Reassemble the head and test for proper operation.
10. Time required to complete the above-proposed repairs will be one to three days.
11. Included Parts: 7 Top Half Head Bearings, 2 Motor Bearings, 4 Bushings, 2 Keys, 1 Drive Belt, 1 Timing Belt, 2 Brake Springs, 1 Set Brake Shoes, 1 Splined Gear Hub, 1 Spindle Pulley Hub, 1 Drawbar, 1 Feed Reverse Knob Assembly, 1 Feed Trip Lever, 1 Reverse Trip Ball Lever
12. Any additional required or requested parts will be at an additional charge and will not be installed without the prior approval of your company.
13. Parts & Labor to complete the Deluxe VS Top Half Head Rebuild: $1,995.00
14. If you would like new Spindle Bearings installed add $500.00.


 
H&W Machine Repair & Rebuilding Inc. 2119 Meyer Rd. Fort Wayne, IN 46803 (260) 422-0020 or (800) 285-5271 Fax:(260)423-9476